PVC YOU LATER: Cheap/Easy DIY Kids Time Capsule Project

I recently stumbled upon an ad for a time capsule being sold as a product for kids by the Smithsonian.  Though pricey, I liked the idea because it reminded me of the time capsule project that my dad spearheaded with me when I was a kid.  Our time capsule did not look as futuristic as the one sold by the Smithsonian, but I am certain that it offered the same amount of excitement and entertainment.  Though I liked it, I did not order the Smithsonian’s time capsule kit, what I did was run to the hardware store and buy the components needed for me and my little ones to make our own.

The PVC time capsule project will typically cost around $20 depending on the components that you already have that are not uncommon to have around the house.  The materials needed for this project are as follows:

1- 2ft x 4″ piece of PVC pipe (2″ or 3″ could be used) (about $9)

1- 4″ PVC drain cap (about $2)

1- 4″ PVC cleanout plug (about $4)

1- 4″ PVC hub x female adapter (about $6)

PVC cement and primer or all in one (price varies)

If you decide to use a smaller diameter pipe, the price of the build will decrease.  All named components are pictured below.

Assembly

I do not actually glue/cement the pipe together in my pictures and video but the glue/cement process is critical to the finished water-tight product.  For instructions on how to glue/cement PVC pipe together click here.

The material list says to get a 2ft long piece of 4 inch pipe but the length of your capsule is totally your preference.  I would suggest cutting the pipe down to 14 or 16 inches, but that is just my preference.

DSCF6489_LI

Black arrow-Drain (end) cap Red arrow- Threaded Hub x Female Adapter Green arrow- Cleanout plug

Step 1

DSCF6491

Apply primer to the inside of the end cap and one end of your pipe, then apply glue to both in the same manner and press and hold the end cap onto the pipe firmly for about 5 seconds.

Step 2

DSCF6494

Using the same primer and cement application process as step one, apply both to the non-threaded female adapter end and the opposite end of the pipe from the end cap. Insert pipe into female adapter end and hold firmly for about 5 seconds.

Step 3

DSCF6497

Lastly, thread the cleanout plug into the threaded hub and voila! You are now the proud owner of a homemade time capsule. It is not a bad idea to wrap the clean out plug threads in Teflon tape for added protection against water intrusion.

Finished Product

DSCF6506

I really like this project for a variety of reasons.  It is cheap, fun, and customizable.  Your kids will not only enjoy the build and burying of the time capsule, but they can also have fun painting and drawing on it as well.

Another reason I like this build is that the time capsule can serve as a water-tight vessel for other applications as well.  In the past I have used this same design to serve as dry storage for my welding rods and it works great.

My absolute favorite use for this water-tight container in the past outside of a time capsule is easily its function as dry storage when boating, fishing, or canoeing.  The 14″ long by 4″ diameter tube is great for storing wallets, money, cell phones, and keys while on the water.  Even better is should it be accidentally knocked out of a boat or fall out of an overturned canoe it will float, so the recovery of valuables or personal belongings is only a matter of paddling to it and hoisting it back in your vessel.

Regardless of how you and your family use this little contraption I am certain that you will have a great time completing this project together as my dad and I did, and as my daughters and I will do.  With that being said, I have linked to a few time capsules and dry storage products below that do not require as much effort for those not as motivated to DIY.

Smithsonian Time Capsule

$12 Time Capsule

Welding Rod Dry Container

Dry Box for Boating/Water Activities

Thank you very much for reading.  If you found this post to be informative, useful, or entertaining please be sure to like, comment, share, and follow tool-school.com.  Good luck with your projects!

Jake

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

%d bloggers like this: